Posts

Showing posts with the label vertical stabilizer

Rudder completed for now!

Image
I've riveted the two skins on as much as I can for now until inspection, and made sure it fits with the VS well enough. It's a very quick test, but all looks well. I was especially curious about the spacing between the rudder and the VS up top, where the VOR antenna screws are. I may also add grounding screws for the lighting around there ... lots of room! Satisfying day :)

VOR Antenna & VS Skin Fit

Image
Was waiting on a few more parts! Connected the antenna to its coax cable, which took some figuring out because of this little looped wire that was completely in the way (Part of the "balun" I suspect): I riveted on a cable tie mount and used a cable tie to relieve the forces from the antenna connector itself, and added a bit of RTV silicone to make sure the cable never rubs against one of the mounting screws. Then mount the rib to the rest of the VS frame: Looking good! After making sure the coax was running down to the bottom of the VS nicely, I fitted the skin: Had to open up the antenna holes a bit to prevent rubbing, but everything else seems to fit nicely. Next to deburr, prime and rivet on one side of the skin (Keep the other side clecoed for inspection and to work on lighting wiring, something still to be figured out).

VS & VOR Antenna Work

Image
Had to take a break while my VOR antenna came in, as it was back ordered, so I took a couple of weeks off! Finally, it has arrived. I chose the  RAMI AV-12L . First, I put the frame together: Then, attach the doubler plate and the antenna to the top rib: Upside of this antenna, it's more affordable and less draggy than the obvious alternatives. Downside is, the 2 "rods" are not removable. This means that instead of holes to run them through, I need "slots". So I put those in and made sure to file and deburr everything. Once in place, I secured with the screws and locknuts: I also placed the rib in its spot and cut out the skin where needed: Not the best looking thing, since I had to notch it out, instead of holes. We'll see what we can do to beautify this when comes pain time. Finally, I ran the coax cable for the antenna through the ribs: Note the absence of wiring for lighting. Given my predicament with the lights, this ...