Sling 4 Ninja

You close off the tail from the luggage area with a piece that attaches to the rib, like this: Turns out there are 6 holes that are lined up with rivet heads under them, but the holes are too small: So, I enlarged them, easy peasy:

While I wait a very very long time for some replacement skins, I've been working my way through the plans and doing all the metal prep and priming. No exciting photos to show for that. But every once in a while I hit an independent assembly I can put together! So, I've go the luggage shelf done! Only thing to report is a slight crack where one of the flange bends occurs. I'll just stop drill it and maybe put some aluminum epoxy in to help.